2mm zombies

I wanted some 2mm zombies for my undead army but my previous experiment with chopping individuals off blocks didn't look that great and seemed a bit fiddly for a unit that I might need a lot of. So I had a fish around in the 2mm spares box to see what I had that I could use. The best candidate was the barbarian infantry from the ancients range.

As you can see I have splodged on a trail of blood and gore behind them. This helps indicate what direction they are facing as well as making them easy to spot on the table.

2mm might not be everyone's cup of tea but for the lazy painter there's something to be said for a scale where you can get five new warbands painted while drinking a cup of the aforementioned.

2mm knights, peasants and the new barbarians

For fantasy and medieval gaming I put together some bases of knights to see how that would look. The cavalry blocks definitely look better from a distance where their silver bodies stand out quite well. This is a block I am definitely going to come back to and repaint at some point but here they are for now.

Here's a little experiment using a different block. This one is from the horse and musket range and is supposed to represent peasants. I chose it because they have no shields and the block is quite small compared to the others. As you can see I made a start on texturing the base to make them easy to identify. An agricultural theme seemed appropriate for these tiny peasants.

I liked how they came out so I went back to my barbarians and tried to make the flesh more visible with some careful lines and dots here and there. I think a couple of minutes work on the flesh and a tiny bit of highlighting was worth doing as they were a bit too dark to see before.

 

When I come to do my Gauls I'm going to be a bit bolder with the colours and try out different coloured hair too. It might look like a mutli-coloured blobfest or it might just work.

2mm Undead - zombie dragon

I painted a few more bits and pieces for my undead army. Here's my second attempt at painting some skeleton warriors and riders. I also did a zombie dragon to go with them.

2mm earth elemental and glue top fort

I finished off the 2mm earth elemental that I made with a quick paint and drybrush. He has no real head but I painted a round bit of rock as a red eye. Crude though he is I think he has a certain rocky charm. Dipping him in grit and seeing how he came out was quite fun. The grit gives better shapes than I could carve so I will definitely be using that again for some more rocky monsters.

A fortress in boulder strewn scrubland. The fort is the top from some superglue. I tried to make it look abandoned by adding some vines (wire) to the side. The tree was another experiment, it's a dead paintbrush splayed and firmed up with glue. I still have some details to add to this like some arrow slits in the fort and perhaps some dark foliage here and there. The door is 3mm high.

2mm dwarf army

I wanted a dwarf army in 2mm scale but unfortunately Irregular don't do a dwarf block so I had to improvise. One candidate is the hobbits block as they are noticeably smaller than their lofty 2mm adversaries. I decided against them as they are in rabble formation and look rather weedy. Instead I used the skirmish infantry BG3 from the horse and musket range. These guys are mostly kneeling or otherwise hunkered down making them about the right size.

After painting them silver I painted their faces black and then put a dab of flesh in the middle of the black as their face. The idea being to make them look like they have beards. At 1mm I think that's probably the best I can do!  Please ignore the disturbing naked blob on the front block, that's the first blob of what will hopefully end up looking slightly like a general on a bear. Or a rock if I fudge it up.

Irregular do some nice bombards (RBG30) that might go nicely with these dwarfs. Some converted siege engines (ABG25) might be in order too.

I like the idea of an army of dwarfs supplemented by some elementals so here's my first attempt at a stone elemental. He's on a 1p piece so as you can probably tell he's big in 2mm scale. I made the basic shape out of green stuff and then covered it in glue and dipped it into some basing grit.

I haven't decided whether to finish him off as some kind of rock and mud creation or paint him up as lava.

Talking of lava here's an unintentionally camp (I think) looking fire elemental which I also made from green stuff.

2mm WW1 tanks and a trench piece

Here's a test piece of WW1 scenery I made. It's a 50x50mm MDF base with trenches carved out of some DAS clay. I used the spring from a disposable lighter for the barbed wire. The ditched biplane is by irregular miniatures. I wanted to be sure of the terrain colours before I started painting my armies in earnest.

A base of 2mm Renault FT17 tanks. I gave them the thinnest possible undercoat followed by a brown ink wash because I was scared of losing all the great detail on these tanks. I'm not sure on the final colour scheme but I think you'll agree for 2mm they are quite impressively sculpted miniatures.

These 2mm A7V tanks are crying out for some German crosses on the side, another future project.

And finally, a base of 2mm Schneider tanks. All of these tanks are easily recognisable on the tabletop. They are large enough to paint some unit markings on which I think will be well worth doing at some point.

Test pieces for 2mm undead

Here's some test pieces for my 2mm undead army which I'll be creating by taking ordinary blocks and giving them white skeletal heads. Simple though the effect is I think it looks quite nice, they are certainly easy to distinguish from the living.

Undead cavalry, I painted them black, then added the white bits and finally gave them a wash of vallejo sepia tone to make them look a bit gloomier.

Early imperial Roman infantry repainted as skeletons. I think these will work as the main unit of the undead.

An experimental base of zombies. I used various infantry left over from chopping up blocks and glued them onto the base in a fairly random pattern. I'm not sure if I will make more of these or try to find a block that looks suitably mob-like to represent them.

This necromancer is home made from a tiny blob of green stuff. I need to carve a sliver of plastic for his scythe. The rock pile is made up of failed attempts that got squished.

On the workbench I've got some skeleton archers, chariots, eagles to paint as carrion birds and some ghosts which I've been making from transparent blobs of glue stretched into spooky shapes.

I found some loose order infantry that I think might make nice little vampires as they all have cloaks and a high quality looking banner. I am tempted to add a few tiny coffins to their base and see how that looks.

I try to do a couple of pieces of scenery for each army that I paint so for my undead force I'm going to start with some barrows and a graveyard.

2mm elves vs orcs

I was trying out some rules tonight so I took a couple of pictures of my orcs vs elves game. Here are the forces I used.

Orcs: 7 bases of orcs, 4 bases of trolls, 2 bases of wolf chariots, 2 bases of wolfriders.

Elves: 7 bases of elven archers, 2 bases of treemen, 2 bases of spearmen, 1 base of scouts and 1 base of giant eagles.

The elves were defending some wooded hills. I covered about a fifth of the board with trees and woodland.

The turning point. The orcs needed to take this pass to get at the archers but a lone treeman blocked the way. This developed into an interesting battle with warbands charging it, not killing it and then fleeing as their nerve broke. These wolf chariots eventually did the job after it had been weakened by waves of attackers.

Almost the final turn. The elves have the spear command on the ridge and have been joined by the last of the archers (to the right). Their main hope is the convocation of eagles! The orcs have three warbands and some trolls left.

The eagles took out a warband but the trolls proved too tough for them. At the end the elves had been completely slaughtered! Because of this crushing defeat I think I'll set the next battle in deeper elven woodland.

Spiders, hydras and hoplites

Here are some giant spiders from Irregular's 6mm fantasy range that I couldn't resist. They're surrounding some elven archers.

This hydra is also from Irregular's 6mm fantasy range and makes a good giant monster in 2mm.

 Greek hoplites vs the hydra.

Another picture of that mountain pass from the orcs post. Everything is painted using the same four or five colours blended together. I use emulsion tester pots for almost all my scenery.

 Painting 2mm isn't without its frustrations I have to admit. These hoplites were unfortunately one of them for me. This picture shows two blocks put together to give them a bit of bulk. They are holding spears and have shields. I initially tried to paint every helmet, every shield, every spear in the correct colours and pretty much achieved it but when I put the miniature on the table it looked awful. In the end I mostly just drybrushed it and then painted the shields.

2mm WW1

Today marks the 100th anniversary of Britain's entrance into the first world war. You might like to read about the valuable work of the Royal British Legion here: http://www.britishlegion.org.uk/remembrance/ww1-centenary

The first world war is a sombre subject for wargaming given the huge loss of life but it has remained popular with wargamers especially at the smaller end of the scale. This is no doubt due to the large number of miniatures needed to properly simulate even a small part of this enormous conflict. WW1 perhaps had its heyday as a wargaming era back in the days of board wargames with their heaps of counters. You could argue that 2mm miniatures are just fancy 3d counters.

Irregular Miniatures provides a good range of WW1 specific 2mm miniatures, as well  as multi-purpose ones such as machine gunners and mortars. For tanks there's the MKIV, Schneider, Whippet, FT17 and German A7V.

Some MKIV tanks at a staging post. The horse and musket scenery is a bit small for the 20th century miniatures but I think they work as farm outbuildings. The MKIV's themselves are detailed little miniatures that could be given a fascine add-on without too much trouble.

 A biplane flying over a farm. The generic biplane is large enough to paint some insignia on, another future project. This scenery tile was just a try at making different shapes using filler.

Whippet tanks moving through a wooded pass. Off to the green fields beyond? The trees are made from Javis clump foliage. A bag of which will create a great many trees, just pinch bits off and glue it on. They have a nice texture so I recommend a dark colour so you can drybrush it in whatever colour you like. A mix seems to look more realistic.

This is the IK1 infantry section mounted on a 1p piece. I painted the models in a mix of black and dark brown and then gave them a quick drybrush with a mix of white and British uniform brown from Vallejo.

2mm WWII Germans

Here's a few pictures of my 2mm WW2 German army. I gave them a very quick and simple paintjob starting by spraying them grey and then painting on a darker grey and drybrushing that a bit. Finally I gave them a wash of Vallejo sepia tone which is very handy stuff for 2mm. It picks out all the detail and gives good shadows.

 The tanks are very easy to tell apart even from a distance, something which I was worried about before diving into 2mm.

 I used a product called "no more nails" for the bases. It's a sort of paste that is pretty useful for basing and making texture on scenery. The tanks were glued onto it afterwards to avoid them sinking.

 Sorry about the blurry picture. Some halftracks.

 A simple conversion to mortar halftrack. As you can see I used my two shabbiest halftracks to test it out on.

Wespe self-propelled artillery. It's even got crew inside.

 Tiger! My painting doesn't do this miniature justice, a very nice model.

Another extreme close-up of my Panzers with tank commanders, which I need to paint black uniforms on.

A small force of 2mm WW2 Germans all set for some exciting battles. I still have about two dozen more stands to paint but at this scale that's not daunting at all. I would like to do some authentic looking eastern front and desert forces but for now I'm happy gaming with my Hollywood grey forces.

2mm Orcs

Here's some pictures of my 2mm orc army. I really like the variety of units Irregular Miniatures have created for the orcs.

Orc wolf chariots.  Great detail on these little miniatures. I think the wolves could easily be painted up as rats or lizards as well.

 The whole orc force. Why are the trolls on hills? Because they're hill trolls of course!

Orc warband. I think I might paint a few of these up as some kind of elite ancient unit like gladiators or Greek heroes. The loose order also makes them a prime candidate for snipping off and adding to other blocks.

The orc warbands. The top of their standard is quite round so I painted it up as a skull, a dab of bright colour universally applied to blocks really makes them stand out.

Trolls moving through a mountain pass. The scenery is a test piece I made using DAS clay on a 100x100mm base.

 And here's another shot of it. DAS clay is really fun to play around with and cheap too! I found it stuck to the MDF bases without adhesive which was handy.

Orc wolf riders with nice bright standards and shields. I decided to give the orcs a darker base than the elves I've painted.

Still to do..wyvern riders (nazguls), a green dragon, some archers, goblins (hobbit base) and lots more. I might have a crack at making myself some basilisks as well.